Panels for electrical distribution

Control panels

Elevators and lifts

Surge protection

Road / tunnel lighting

Type 7P.26 surge arresters, SPD Type 2 (2 varistors + 1 gas spark gap) for photovoltaic applications. 
Protects 420 V DC devices and equipment from induced overvoltages. 
Equipped with replaceable modules and signaling with remote contact of the state of the 
varistor in case of failure.
Features include:
<ul>
<li>Visual indicator of the varistor status – in the event of a fault</li>
<li>Signaling with remote contact of the varistor status in case of failure. Connector (07P.01) included in the package (depending on the version)</li>
<li>Replaceable modules</li>
<li>Compliant with prEN 50539-11: 2012</li>
<li>35 mm rail (EN 60715) mounting</li>
</ul>

Function and features:

EurAsian Conformity (EAC)

Servimeters

Report

Technical Datasheet

Instruction manuals

KNX Manual

Toolbox user manual

Communication protocol

Solutions for electrical panels and industrial automation

Soluciones industriales y productos automatizacion industrial

Soluzioni per il quadro elettrico e l'automazione industriale

Produse pentru tablouri electrice si automatizari industriale

Brochure

Selection guide

Catalogs

Other

Declaration of conformity

Guide

Software

3D files

DXF files

Type 7P.26 – Surge Protection Device (SPD) | Finder

robots

index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1

googlebot

bingbot

https://www.findernet.com/en/usa/series/7p-series-surge-protection-devices-spd/type/type-7p26-surge-protection-device-spd/

twitter:card

twitter:creator

twitter:site

Finder S.p.A.

Type 7P.26 surge arresters, SPD Type 2 (2 varistors + 1 gas spark gap) for photovoltaic applications. Protects 420 V DC devices and equipment from induced overvoltages. Equipped with replaceable modules and signaling with remote contact of the state of the varistor in case of failure. Features include:  Visual indicator of the varistor status – in the event of a fault Signaling with remote contact of the varistor status in case of failure. Connector (07P.01) included in the package (depending on the version) Replaceable modules Compliant with prEN 50539-11: 2012 35 mm rail (EN 60715) mounting

Type 7P.26 – Surge Protection Device (SPD)

Finder » Type 7P.26 – Surge Protection Device (SPD) Comments Feed

WPML ver:4.6.10 stt:74,75,68,79,94,98,99,73,100,101,76,77,102,80,83,103,84,85,104,105,106,108,95,96,65,67,86,113,92,97,69,78,82,66,114,71,87,88,72,89,90,91,107,93,115,81;

generator

https://cdn.findernet.com/app/uploads/2020/03/24155432/7P26-surge-protection-device-768x768.png

Type 7P.26 surge arresters, SPD Type 2 (2 varistors + 1 gas spark gap) for photovoltaic applications.
Protects 420 V DC devices and equipment from induced overvoltages.
Equipped with replaceable modules and signaling with remote contact of the state of the
varistor in case of failure.
Features include:

Visual indicator of the varistor status – in the event of a fault
Signaling with remote contact of the varistor status in case of failure. Connector (07P.01) included in the package (depending on the version)
Replaceable modules
Compliant with prEN 50539-11: 2012
35 mm rail (EN 60715) mounting



4R4pEF9LPm66sZ51r_mEN4l2pAfDTpiRB7F64HY_mhY

google-site-verification

facebook-domain-verification

Elettrospecialisti

Punto Luce

Emme Bi Store

Elco

Elettronew

7P Series - Surge Protection Devices (SPD)

Single phase (1 varistor + 1 spark gap) Type 3, DIN rail mounting 

255 V Max (U ) for SPD Type 1, N+PE (7P.09)

260 V Max (U ) for SPD Type 1+ 2 (for U = 230-240 V AC)

275 V Max for SPD Type 1 “Low Up”, Type 2 (Uc) (for UN = 230-240 V AC) and Type 3

1.000 V DC Max (or N+PE connection for spark gap modules)

Built-in remote status signalling contact

Finder’s 7P series of Surge protection devices (SPD’s) are a great addition to any control panel or distribution board, especially with the introduction of the new 18th edition wiring regulations.

7P Series

Type 7P.26– Surge Protection Device (SPD)